A glazed meeting room built into the corner of a showroom, with an L-box ceiling and concealed lighting over the table.
The client wanted a meeting room that did not close the showroom in, so the enclosure is full-height glass with a sliding door and an acoustic seal at the head.
The track is carried on steelwork fixed back to the soffit rather than on the ceiling, which is what lets the door run true once the ceiling is loaded. Above the table an L-box drops from the new ceiling with a concealed LED strip; the rest of the room is on flush downlights set out on the reflected ceiling plan.
The showroom stayed open throughout, so the partition was pre-assembled off site and the glass went in over one weekend.
CondominiumNew cove ceilings and lighting through the living and dining areas, with a full skim and repaint so no patch lines show.
OfficeAn open floor split into four offices and a meeting room, with a new ceiling and lighting layout set out around the existing air-con.
HDBA 65-inch screen mounted on a feature wall with every cable taken inside it, so nothing hangs below the panel.
